WM-E1S NB

LTE Cat.M / Cat.NB modem for Honeywell / Elster, Itron, Landis+Gyr electricity meters

Electricity meter
Smart Metering
Cat.M / Cat.NB
RS232 / RS485
FW Updates
Remote Access

UPGRADE THE MODEMS NOT THE SMART METERS!

All around the world mobile operators are shutting down 2G/3G networks in order to give way to 5G. Companies that operate smart meters with 2G/3G connectivity must plan the migration to the latest 4G LTE network which is well-positioned to dominate smart metering communication technologies in the upcoming years. The migration to LTE has many advantages, for example, a shorter readout time due to the high-speed network with low latency.

Utilities have two options for migration: replace the meters or upgrade the modems within their routers! The 1st option comes with a high CAPEX, while the 2nd option is a future-proof solution that reduces TCO.  

Our company develops cellular modems that work smoothly and are fully compatible with the different models of electricity meters. These devices were designed to fit under the terminal cover of the meter and are compliant with all Honeywell / Elster, Itron and Landis+Gyr standards. 

Our cellular modems represent a future-proof migration solution to the LTE network with the same functionality, on higher data speed. Configuration and firmware updates can be done remotely, minimizing the need for costly site visits.

The modem’s case was designed to fit under the terminal cover of the mentioned meters and can be connected to the meter through RS232 or RS485 connection. It can be configured to “push” the data it reads from the meter to the HES periodically at pre-programmed intervals or triggered by an alarm/event (for example, power outage, cover removal, reverse run etc.). 

By option, the 2 digital input feature is also available, which can be used for input status monitoring or sabotage detection.

The modem reads actual and stored consumption data, recorded event logs, that can be used to read or modify certain parameters of the meter remotely. The device can be powered from the meter’s mains connection of the 57/100V AC power network (phase voltage) or 230/400V AC power network (line voltage).

It can be accessed remotely through the cellular network and it can send data on the Internet by using an APN.

The modem is fully configurable by our WM-E Term® software.

 

Main features

  • Cellular module: LTE Cat.M / Cat.NB with optional 2G “fallback”
  • It can be assembled into the meter’s enclosure and fastened securely (sealed and separated from meter)
  • Design & connectivity meets with meter standards
  • Power supply (AC) from the meter (optional DC)
  • Inputs:
    • RS232 connector options (D-SUB9 / D-SUB25 / RJ12 / RJ45)
    • RS485 connector options (2- or 4 wire / RJ12 / RJ45)
    • 2 digital input option (input status / sabotage detection)
  • Compatible with
    • Elster® / Honeywell® Alpha A1500, A1700, A1800, A1140/A1160 meters
    • Itron® SL7000, EM600 (E620), ACE6000, ACE8000 meters
    • Landis+Gyr® ZMG electricity meters
    • Installable to any meter as universal, external modem
  • Surge protection option (from 4kV up to 12kV)
  • „Pull” mode
  •  IEC 62056-21 protocol, transparent data transmission
  • Remote & safe firmware update and configuration
  • Supercapacitor option (for LastGASP SMS notification)
  • WM-E Term® software (mass fw updates, configuration)
  • You can manage the device by Device Manager® software (order option)

 

Application

  • Utility companies
  • Meter data transmission to the HES centre
  • Smart Metering
  • Industrial measurement

Design and outfit

  • The modem is installable inside the meter enclosure
  • RS232 interface connector options: D-SUB9 / D-SUB25 / RJ12 / RJ45
  • RS485 interface connection options: 2-wire / 4-wire / RJ12  / RJ45
  • 2 digital inputs – optional
  • AC power from the meter (optional DC power)

 

Compatibility

  • Honeywell® / Elster®  Alpha A1500, A1700, A1800 and A1140, A1160 electricity meters
  • Itron® SL7000, EM600 (E620), ACE6000, ACE8000 meters
  • Landis+Gyr® ZMG electricity meters
  • Installable to any meter as universal, external modem

 

Operation

  • „Pull” mode
  • IEC 62056-21 protocol, transparent data transmission
  • CSData call (2G)
  • Immediate alarm notification (power loss, input status)

 

Accessories (order option)

  • RJ45 cable, converter (for meter connection)
  • External SMA or FME antenna (50 Ohm) – order option
  • WM-E Term® configuration software (mass fw update, actualization of settings)
  • You can manage the device by Device Manager® software (order option)

 

Technical data

WM-E1S

Datasheet – WM-E1S (AC power) – LTE Cat.1 module options with 2G or 2G / 3G “fallback”, LTE Cat.M / Cat.NB modules with optional 2G “fallback”

Datasheet – WM-E1S (DC power) – LTE Cat.1 module options with 2G or 2G / 3G “fallback”, LTE Cat.M / Cat.NB modules with optional 2G “fallback”


Quick Reference Guide

Installation Manual

WM-E Term User Manual


WM-E1S Parameter Description

WM-E Term configuration tool

You may also like…

...
4G LTE ANTENNA WITH MAGNETIC MOUNT (6dBi, SMA)

4G LTE antenna with magnetic mount, SMA connection, 2.5m long RG174 cable, 6dBi max. gain

...
IoT DEVICE MANAGER

The remote management and maintenance of an IIoT solution can be a real challenge. Improve the network availability and operational efficiency of your fleet!

Request quote

We are using Google Analytics

Please note that we use Google Analytics monitoring to analyze traffic and interests on our website, in order to provide an anonymous view of the distribution of visits.
uses personal information - to make internal, marketing decisions (promotions, trends, visits to visiting companies). We don't send these data to third parties.
Learn more about Google's privacy policy: www.google.com/analytics

Please use the buttons below to enable if you accept use Google Analytics, or indicate if you do not enable it.