WIRELESS SAFETY TRANSMITTER

Easy-to-integrate wireless alarm signal transmitter with cellular communication

Safety transmit
2G/3G/4G access
Inputs/Relay
TIP RING
Contact/Voltage
Gate opening

Land-line based security systems are the past. They are more expensive to operate and less secure than modern cellular-based security systems. No need to replace the whole system, only the signal transmitter module. Upgrade to cellular today.

The EASY2S is our reliable cellular alarm signal transmitter and remote input monitoring device for security systems. It is suitable for both alarm signaling, input monitoring (through its I/Os) and can even be used to control connected devices (like gates) remotely.

The communicator receives the incoming alarm signals from connected security sensors through the tip-ring plug and transmits alarm signals to the security monitoring or dispatch center through Contact ID (CID) or SIA DC-09 protocol. The device can be configured remotely using our EasyTerm config tool, or via SMS messages.

It emits periodic life signals and provides detection and notification capabilities of wire cut sabotage. The output line can be switched remotely (for gate opening, device control).

Alarms or events can be configured to send immediate SMS notification (up to 4 phone numbers). The device can be ordered with 2G cellular module.

 

Benefits

  • Retrofit your land-line security system with our cellular alarm transmitter so you will not need to replace the whole system to have a future-proof solution
  • Use it as backup alarm transmission channel (GSM voice or data)
  • Connect external devices you would like to control remotely
  • Extend the system with further I/Os (due the optional expansion PCB)
  • Connect an extra siren, a spare battery pack, or a sabotage switch to the device and provide thus the highest level of safety for your home, office, company

Communication

  • Supporting 2G (GSM / GPRS) cellular networks
  • GSM voice (for traditional dispatch centers)

 

Connectors

  • PCB version with fixation lags (for easy fit to housing, optional safety metal box)
  • 2pcs isolated digital inputs (operation mode selection by jumpers)
    • voltage (high level: 5-24V, low level: 0-1V)
    • contact (0.3-1mA)
    • detection of wire cut, short sabotage
  • 1pc relay output (remote switch: 2A-120VAC, 1A-24VDC)
  • Simulated analog phone line (ALARM TIP-RING) input for alarm centers
  • Power/battery connector (8-24VDC, 800mA – terminal block)
  • RJ11 port (configuration, firmware refresh)
  • SMA-M antenna connector (50 Ohm)
  • Push insert-SIM card bay

 

Software features

  • Receiving alarm system signals
  • Event signaling with Contact ID (CID) or SIA DC-09 protocol, providing life signals
  • Wireless alarm signaling for dispatch center (analog GSM voice up to 4 phone lines)
  • Wireless alarm signaling for IP adresses (primary, backup server)
  • Handling zones, events
  • Voltage/contact input line change signaling (input line status changes)
  • Output switch/Gate control with delay (by local, SMS commands, by calling/ringing, TCP)
  • Massive contact list for output control
  • Advanced alarm SMS text notification (reports, IO status, alarms)
  • Voice call/ringing alarm notification (up to 4 phone numbers)
  • Without alarm center, it is also able to generate Contact ID codes (answer to input line signal changes)
  • Compatibility with SIA DTMF / SIA DC-09 protocol, IP receivers, SIMS Cloud® software

 

Configuration

  • EasyTerm® parameter configuration software (Windows® is supported)
    • Configuration (serial port, SMS text commands, TCP/IP
    • Firmware refresh/configuration download/upload (serial port, Ftp)
    • Remote access (TCP)
  • Operation status LEDs

 

Security

  • Watchdog (monitoring and auto recovery)
  • Configuration settings locally stored
  • Backup/spare battery connection
  • Siren connection (input line)
  • Wire cut, short circuit and sabotage detection

 

Accessories

  • RJ11-RS232 cable (for configuration, updates) – optional
  • RS232-USB  cable (for configuration, updates) – optional
  • Communication antenna (gained, SMA) – according to module selection
  • Battery pack, battery charger, power supply – optional
  • Safety box (optional by order)
  • EasyTerm® configuration software

 

 Technical data

M2M Easy 2S / Wireless Safety Transmitter

Product Datasheet


Quick Guide

Installation Manual


Configuration software – EasyTerm v1.3.5

Device firmware V21/R09/E05


Driver (FTDI) for EasyTerm direct USB connection (Win XP/Vista/Win7/Win8/Win10/Win11)

Driver (ATEN) for EasyTerm USB-RS232 connection (Windows Xp/Vista/Win7/Win8/Win10/Win11)

Driver (CH341SER) for EasyTerm USB-RJ11 connection (Win XP/Vista/Win7/Win8/Win10/Win11)

Driver (CH341SER) for EasyTerm USB-RJ11 connection (MacOS)

Driver (CH341SER) for EasyTerm USB-RJ11 connection (Linux)

You may also like…

...
UMTS ANTENNA WITH MAGNETIC MOUNT

2G/3G antenna with magnetic mount, SMA connection, 0.5 or 2.5m long RG174 cable, max. 3dBi gain

...
ADHESIVE SURFACE 2G-3G ANTENNA

Adhesive 2G-3G surface antenna with FME connector for GSM/DCS/PCS/UMTS/WiFi bands, 0dBi gain

...
4G LTE ANTENNA WITH MAGNETIC MOUNT (6dBi, SMA)

4G LTE antenna with magnetic mount, SMA connection, 2.5m long RG174 cable, 6dBi max. gain

...
WIRELESS SAFETY TRANSMITTER IO EXPANSION

Optional input & output expansion for the Easy2S. Add 6 extra input lines and 3 relays output to the existing […]

...
SIMS CLOUD

Full-featured, cloud-based remote dispatching & monitoring software for safety surveillance of objects and signaling of safety communicators (alarm & fire alarm transmitters, GPS trackers)

...
NEW!
RJ11-USB Easy2S configuration cable

RJ11-USB Easy2S configuration cable

...
RJ11-RS232 Easy2S configuration cable

M2M Easy2S/Easy2 configuration cable (RJ11-RS232)

Request quote

We are using Google Analytics

Please note that we use Google Analytics monitoring to analyze traffic and interests on our website, in order to provide an anonymous view of the distribution of visits.
uses personal information - to make internal, marketing decisions (promotions, trends, visits to visiting companies). We don't send these data to third parties.
Learn more about Google's privacy policy: www.google.com/analytics

Please use the buttons below to enable if you accept use Google Analytics, or indicate if you do not enable it.